2.13″ Low Operating temperature E-Paper Display, GDEM0213E26LT







Our GDEM0123E26LT display is a Bi-Stable Active Matrix Electrophorectic display (AM EPD), it has a diagonal measurement of 2.13″ with an active area of 23.71 x 48.55mm and a resolution of 104×212 pixels. It has a built in controller/driver which includes gate and source drivers, a MCU interface (Serial 3 & 4 wire SPI), timing controller and oscillator, DC-DC converter, SRAM, LUT and V-COM.

E-Paper displays offer a highly reflectance and high contrast display with near on 180° viewing angles on both the X and Y axis, they can be mounted in both landscape and portrait orientations without the need to optimise the display for either 6 or 12 o’clock viewing directions. This particular display has an extended operating temperature of -25°C ~ 50°C enabling this E-Paper display to compete with the TN & STN LCD displays.


  • 2.13″ Diagonal Display
  • 104(source) x 212(gate) pixel resolution
  • Module size, 29.2 x 59.2 x 1.05mm
  • Active area, 23.71 x 48.55mm
  • Pixel pitch, 0.228 x 0.229mm
  • Wide operating temperature, -25°C ~ 50°C
  • Storage temperature, -25°C ~ 70°C
  • Ultra wide viewing angles, near on 180° on all axis
  • Landscape and portrait viewing
  • Ultra low current consumption, 3mA during screen update
  • Ultra low current consumption in sleep mode, 20µA (deep sleep mode, 5µA)
  • Hard-coat antiglare display
  • On chip display RAM
  • 4 & 3 wire SPI interface
  • Waveform can be stored in On-Chip OTP or written by MCU
  • On-chip oscillator
  • On-chip booster and regulator control for generating VCOM, Gate & Source driving voltages
  • Supports partial screen up-dates
  • Screen update time, 3 seconds

For further information please call the sales office on 01296 332000 or email sales@craftdata.co.uk