.

Product Features

  • Onboard 4th Generation Intel® Core i7/i5/i3 / Celeron® QC/DC processors
  • 2x DDR3/DDR3L SO-DIMM, Max. 16GB
  • Integrated VGA, supports DVI-I/ DVI-D/ LVDS or eDP/ DisplayPort
  • 2x Intel® PCI-E Gigabit LAN
  • Watchdog timer, Digital I/O, iAMT (9.0), vPro, iSMART
  • 6x USB 2.0, 4x USB 3.0, 6x COM, 4x SATA III, 2x SATA II
  • 1x PCI-E(x16), 2x Mini PCI-E(x1)

The MI980 Mini-ITX supports the 4th Generation Intel® Core™ i7/i5 processors. This motherboard is based on the mobile Intel® QM87 and HM86 Express chipsets that offer an increase in graphics and CPU performance over previous generations. The new board design was developed primarily for the industrial and embedded markets that require high processing capability, but at the same time are constrained by power limits.

The MI980 is equipped with two standard voltage or low-voltage DDR3 SO-DIMM sockets supporting up to 16GB of system memory. Video connections include DVI-I, DVI-D, LVDS/eDP and DisplayPort. To accommodate expansion cards, it also comes with one PCI Express x16 and two Mini PCI Express x1 slots (one for mSATA). Standard to this 170mm x 170mm platform are 6x USB 2.0, 4x USB 3.0, 6x COM (jumperless selection), 4x SATA III, 2x SATA II with the latest Intel-based dual Gigabit LAN support, which allow comprehensive peripheral and networking features. The MI980VF is also available with advanced capabilities such as Intel® Active Management Technology 9.0, Trusted Platform Module 1.2, RAID and state-of-the-art Intel® vPro™ technology.

CPU Type BGA1364 for 4th generation Intel® mobile Core™ i7/i5 /i3/ Celeron® QC/ DC processors
System Memory 2x DDR3/DDR3L SO-DIMM, Max. 16GB (Non-ECC)
System Chipset MI980VF Series:Intel® QM87 PCH
MI980F: Intel® HM86 PCH
BIOS AMI
Watchdog Timer 256 levels
SSD 1x mSATA via Mini PCI-E (Thru SATA III)
H/W Monitor Yes
Expansion Slot 1x PCI-E(x16), 2x Mini PCI-E(x1)
VGA Controller 4th Generation Intel® Core i7/i5/i3 / Celeron® integrated Gfx, supports CRT, DVI, DisplayPort, LVDS / eDP
VGA Memory Max. Shared memory – 1024MB
Display Interface Supports 24-bit dual channel LVDS/eDP, DVI-I, DVI-D, DisplayPort
Controller MI980VF Series: Intel® I217LM Gigabit LAN PHY
MI980F: Intel® I217V Gigabit LAN PHY
Intel® I211AT PCI-E Gigabit LAN (as 2nd LAN)
Connector 2x RJ-45 on board
I/O Chipset Fintek F81866AD-I
1x RS-232/422/485 (jumperless selection)
5x RS232
MI980VF Series: 4x SATA III, 2x SATA II
MI980F: 2x SATA III, 2x SATA II
USB 2 ports on board, 4 ports via pin-header (USB 2.0)
4 ports on board (USB 3.0)
Audio Intel® QM87 / HM86 PCH built-in HD audio controller + ALC892 w/ 7.1 channels
Others Digital I/O (4-in/4-out), ATX power connector, iSMART support
Dimensions 170mm x 170mm (6.7″ x 6.7″)
Max. Power Requirement Intel® Core™ i5-4402E 1.60 GHz
w/ 2x 2GB DDR3-1333
+3.3V: 0.29 A    +5V: 0.73 A
+5Vsb: 1.70 A    +12V: 2.01 A
Operating Temperature 0°C~60°C (32°F~140°F)
Storage Temperature -20°C~80°C (-4°F~176°F)
Relative Humidity 10%~90% (non-condensing)

.

To select a TFT LCD for your embedded board please visit http://crystal-display.com/components/displays/lcd/

If you would like a touch screen then please visit http://crystal-display.com/components/touchscreens/

.

For more information please email info@crystal-display.com or call our main office on +44 (0)1634 292 025.

.