E: info@crystal-display.com  T: +44 (0)1634 327420

CDS adds Hantouch 4,5,8 wire resistive touchscreens to its range

A rugged reliable and accurate range of touchscreens has been introduced by CDS to meet all your touchscreen requirements.
4-Wire Specification
Rating
1. Voltage
DC 5Volts
2. Operating Temperature Range
-20℃ to 60℃ (Humidity 20% to 90% RH)
3. Storage Temperature Range
-30℃ to 70℃ (Humidity 20% to 90% RH)
Optical
1. Transmittance
80% or more
Electrical
1. Resistance between Lead
100~1200 Ω
2. Linearity
Less than 1.5%
3. Insulation Resistance
20 MΩ or more at DC 25V
4. Chattering Time
10㎳ or less at 100 MΩ Pull-up
Mechanical
1. Input Method
A Special Stylus or Finger
2. Operating Force
Stylus : 80g or less (R 0.8 Polyacetal Pen)
Finger : 80g or less (R 8.0 HS40′ Silicon Rubber)
3. Surface Hardness
3H or more (according to JIS-K5400)
Reliablility
1. High Temperature Test
240 hours at +80℃
2. Low Temperature Test
240 hours at -40℃
3. Humidity Test
240 hours at +60℃, 90% RH
4. Thermal Shock Test
One cycle is 30min at -40℃ and than 30min at +80℃(10 cycles)
Durability
1. Writing Friction Resistance
Write 100,000 times in 30 mm (force : 250gf, speed : 60 mm/sec)
2. Touch Life
Touch 1 million times R 8.0 silicon Rubber (force : 250gf, speed : 2 cycles/sec)
3. Heat Seal Peeling Strength
400gf / cm or more (peeling up ward by 90′ in direction of X, speed : 50mm/min)
5-Wire Specification
Rating
1. Voltage
DC 5Volts
2. Operating Temperature Range
-10℃ to 60℃
3. Storage Temperature Range
-40℃ to 75℃
Optical
1. Transmittance
83±5% at 550nm wavelength
Electrical
1. Resistance between Leads
50~300 Ω
2. Linearity
±1.5% or less in X, Y axis
3. Insulation Resistance
20 MΩ or more at DC 25V
4. Chattering Time
10ms or less
Mechanical
1. Input Method
Pen or Finger
2. Operating Force
Pen: less than 120g;(Tip polyacetal POM diameter 0.8mm)
Finger : less than 125g;(Silicon Rubber SR 70HS diameter 8mm)(
3. Surface Hardness
3H or higher with ASTM-D3363 standard
Reliablility
1. High Temperature Test
120 hours at +70℃
2. Low Temperature Test
120 hours at -40℃
3. Humidity Test
120 hours at +60℃, 90% RH
Durability
1.Touch Life -Pen
Hit more than 10,000,000 times in 10~100mm with R0.8 Polyacetal Test Header (force : 250g)
2.Touch Life -Finger
Touch more than 35,000,000 times with Silicon Rubber 70HS diameter 8mm (force : 250g)

For more information pleasse contact bartram@crystal-display.com or visit the releavant webpage.

Chris Bartram, Managin Director

Close Menu
Translate »

You have successfully subscribed to the newsletter!

There was an error while trying to send your request. Please try again.

Crystal Display Systems will use the information you provide on this form to be in touch with you and to provide updates and marketing.